Immunotherapy for Triple-Negative Breast Cancer.

Triple-negative breast cancer (TNBC) is characterized by extensive tumor heterogeneity at both the pathologic and molecular levels, particularly accelerated aggressiveness, and terrible metastasis. It is responsible for the increased mortality of breast cancer patients. Due to the negative expression of estrogen receptors, progesterone receptors, and human epidermal growth factor receptor 2, the progress of targeted therapy has been hindered. Higher immune response in TNBCs than for other breast cancer types makes immunotherapy suitable for TNBC therapy. At present, promising treatments in immunotherapy of TNBC include immune checkpoints (ICs) blockade therapy, adoptive T-cell immunotherapy, and tumor vaccine immunotherapy. In addition, nanomedicines exhibit great potential in cancer therapy through the enhanced permeability and retention (EPR) effect. Immunotherapy-involved combination therapy may exert synergistic effects by combining with other treatments, such as traditional chemotherapy and new treatments, including photodynamic therapy (PTT), photodynamic therapy (PDT), and sonodynamic therapy (SDT). This review focuses on introducing the principles and latest development as well as progress in using nanocarriers as drug-delivery systems for the immunotherapy of TNBC.

Programmable Local Orientation of Micropores by Mold-Assisted Ice Templating.

Pore geometry plays a crucial role in determining the properties and functions of porous materials. Various methods have been developed to prepare porous materials that have randomly distributed or well-aligned pores. However, a technique capable of fine regulation of local pore orientation is still highly desired but difficult to attain. A technique, termed mold-assisted ice templating (MIT), is reported to control and program the local orientation of micropores. MIT employs a copper mold of a particular shape (for instance a circle, square, hexagon, or star) and a cold finger to regulate the 3D orientation of a local temperature gradient, which directs the growth of ice crystals; this approach results in the formation of finely regulated patterns of lamellar pore structures. Moreover, the lamellar thickness and spacing can be tuned by controlling the solution concentration.

Tunable Electrical Properties of Embossed, Cellulose-Based Paper for Skin-like Sensing.

This article describes a process of fabricating highly porous paper from cellulosic fibers and carbon black (CB) with tunable conductivity. By embossing such paper, its porosity decreases while its conductivity increases. Tuning the porosity of composite paper alters the magnitude and trend of conductivity over a spectrum of concentrations of conductive particles. The largest increase in conductivity from 8.38 × 10-6 to 2.5 × 10-3 S/m by a factor of ∼300 occurred at a percolation threshold of 3.8 wt % (or 0.36 vol %) with the composite paper plastically compressed by 410 MPa, which caused a decrease of porosity from 88% to 42% on average. Our composite paper showed stable piezoresistive responses within a broad pressure range from 1 kPa up to 5.5 MPa for 800 cycles. The piezoresistive sensitivities of the composite paper were dependent on concentration and decreased with pressure. Composite paper with 7.5 wt % CB had sensitivities of -0.514 kPa-1 over applied pressures ranging from 1 to 50 kPa and -0.215 kPa-1 from 1 to 250 kPa. This piezoresistive paper with embossed patterns enabled touch sensing and detection of damage from darts and punches. Understanding the percolation behavior of three-phase composites (cellulosic fibers/conductive particles/air) and their response to damage, pressure, and processing conditions has the potential to enable scalable applications in prosthetics and robotics, haptic feedback, or structural health monitoring on expansive surfaces of buildings and vehicles.

Low-NOx and High-Burnout Combustion Characteristics of a Cascade-Arch-Firing, W-Shaped Flame Furnace: Numerical Simulation on the Effect of Furnace Arch Configuration.

A cascade-arch-firing low-NOx and high-burnout configuration (CLHC) was proposed as a solution for the W-shaped flame furnace's incompatibility problem of strengthened low-NOx combustion and high burnout. Numerical simulations verified by industrial-size measurements of a 600 MWe W-shaped flame furnace were used to confirm the CLHC's low-NOx and high-burnout characteristics and evaluate its cascade-arch configuration effect on the gas/particle flow, coal combustion, and NOx formation. The furnace with the existing low-NOx combustion art showed NOx emissions of about 900 mg/m3 at 6% O2 and carbon in fly ash of about 5%. In applying CLHC as a replacement for the prior art, numerical simulations at typical cascade-arch configurations of CL = 1/5, 1/4, and 1/3 (CL signifying the ratio of the lower arch depth to the total arch depth) showed that as CL increased, both the flow field and combustion symmetry initially improved but then deteriorated. In conjunction with the improvement in both NOx emissions and burnout, the CL = 1/4 setting achieved the best furnace performance with NOx emissions 707 mg/m3 at 6% O2 and carbon in fly ash of 5.5%. In comparison with the prior low-NOx art, CLHC reduced further NOx emissions by 22% and almost maintains the burnout rate.

Carbon-Coated Gold Nanorods: A Facile Route to Biocompatible Materials for Photothermal Applications.

Gold nanorods and their core-shell nanocomposites have been widely studied because of their well-defined anisotropy and unique optical properties and applications. This study demonstrates a facile hydrothermal synthesis strategy for generating carbon coating on gold nanorods (AuNRs@C) under mild conditions (<200 °C), where the carbon shell is composed of polymerized sugar molecules (glucose). The structure and composition of the produced core-shell nanocomposites were characterized using advanced microscopic and spectroscopic techniques. The functional properties, particularly the photothermal and biocompatibility properties of the produced AuNRs@C, were quantified to assess their potential in photothermal hyperthermia. These AuNRs@C were tested in vitro (under representative treatment conditions) using near-infrared (NIR) light irradiation. It was found that the AuNRs produced here exhibit exemplary heat generation capability. Temperature changes of 10.5, 9, and 8 °C for AuNRs@C were observed with carbon shell thicknesses of 10, 17, and 25 nm, respectively, at a concentration of 50 µM, after 600 s of irradiation with a laser power of 0.17 W/cm(2). In addition, the synthesized AuNRs@C also exhibit good biocompatibility toward two soft tissue sarcoma cell lines (HT1080, a fibrosarcoma; and GCT, a fibrous histiocytoma). The cell viability study shows that AuNRs@C (at a concentration of <0.1 mg/mL) core-shell particles induce significantly lower cytotoxicity on both HT1080 and GCT cell lines, as compared with cetyltrimethylammonium bromide (CTAB)-capped AuNRs. Furthermore, similar to PEG-modified AuNRs, they are also safe to both HT1080 and GCT cell lines. This biocompatibility results from a surface full of -OH or -COH groups, which are suitable for linking and are nontoxic Therefore, the AuNRs@C represent a viable alternative to PEG-coated AuNRs for facile synthesis and improved photothermal conversion. Overall, these findings open up a new class of carbon-coated nanostructures that are biocompatible and could potentially be employed in a wide range of biomedical applications.

Direct Hydrothermal Synthesis of Carbonaceous Silver Nanocables for Electrocatalytic Applications.

This study demonstrates a facile but efficient hydrothermal method for the direct synthesis of both carbonaceous silver (Ag@C core-shell) nanocables and carbonaceous nanotubes under mild conditions (<180 °C). The carbonaceous tubes can be formed by removal of the silver cores via an etching process under temperature control (60-140 °C). The structure and composition are characterized using various advanced microscopic and spectroscopic techniques. The pertinent variables such as temperature, reaction time, and surfactants that can affect the formation and growth of the nanocables and nanotubes are investigated and optimized. It is found that cetyltrimethylammonium bromide plays multiple roles in the formation of Ag@C nanocables and carbonaceous nanotubes including: a shape controller for metallic Ag wires and Ag@C cables, a source of Br(-) ions to form insoluble AgBr and then Ag crystals, an etching agent of silver cores to form carbonaceous tubes, and an inducer to refill silver particles into the carbonaceous tubes to form core-shell structures. The formation mechanism of carbonaceous silver nanostructures depending upon temperature is also discussed. Finally, the electrocatalytic performance of the as-prepared Ag@C nanocables is assessed for the oxidation reduction reaction and found to be very active but much less costly than the commonly used platinum catalysts. The findings should be useful for designing and constructing carbonaceous-metal nanostructures with potential applications in conductive materials, catalysts, and biosensors.

Enhanced charge transport and photovoltaic performance induced by incorporating rare-earth phosphor into organic-inorganic hybrid solar cells.

In this work, dysprosium ion decorated yttrium oxide (Dy(3+):Y2O3) nanocrystal phosphors were incorporated into TiO2 acceptor thin film in a bid to enhance the light harvest, charge separation and transfer in the hybrid solar cells. The results show that the energy level offset between the donor (P3HT) and the acceptor (Dy(3+):Y2O3-TiO2) has been narrowed down, thus leading to the enhanced electron and hole transports, and also photovoltaic performances as compared to pure TiO2 without incorporating Dy(3+):Y2O3. By applying femtosecond transient optical spectroscopy, after the incorporation of dopant Dy(3+):Y2O3 into TiO2 at 6 wt%, both the hot electron and hole transfer lifetimes have been shortened, that is, from 30.2 ps and 6.94 ns to 25.1 ps and 1.26 ns, respectively, and an enhanced efficiency approaching 3% was achieved as compared to 2.0% without doping, indicating that the energetic charges are captured more efficiently benefitting a higher power conversion efficiency. Moreover, these results reveal that both the conduction band (CB) and valence band (VB) edges of the acceptor were elevated by 0.57 and 0.32 eV, respectively, after incorporating 6 wt% Dy(3+):Y2O3. This work demonstrates that distinct energy level alignment engineered by Dy(3+):Y2O3 phosphor has an important role in pursuing efficient future solar cells and underscores the promising potential of rare-earth phosphor in solar applications.

Crystal plane-dependent gas-sensing properties of zinc oxide nanostructures: experimental and theoretical studies.

The sensitivity of a metal oxide gas sensor is strongly dependent on the nature of the crystal surface exposed to the gas species. In this study, two types of zinc oxide (ZnO) nanostructures: nanoplates and nanorods with exposed (0001) and (10̄10) crystal surfaces, respectively, were synthesized through facile solvothermal methods. The gas-sensing results show that sensitivity of the ZnO nanoplates toward ethanol is two times higher than that of the ZnO nanorods, at an optimum operating temperature of 300 °C. This could be attributed to the higher surface area and the exposed (0001) crystal surfaces. DFT (Density Functional Theory) simulations were carried out to study the adsorption of ethanol on the ZnO crystal planes such as (0001), (10̄10), and (11̄20) with adsorbed O(-) ions. The results reveal that the exposed (0001) planes of the ZnO nanoplates promote better ethanol adsorption by interacting with the surface oxygen p (O2p) orbitals and stretching the O-H bond to lower the adsorption energy, leading to the sensitivity enhancement of the nanoplates. These findings will be useful for the fabrication of metal oxide nanostructures with specifically exposed crystal surfaces for improved gas-sensing and/or catalytic performance.

Exciton generation/dissociation/charge-transfer enhancement in inorganic/organic hybrid solar cells by robust single nanocrystalline LnPxOy (Ln = Eu, Y) doping.

Low-temperature solution-processed photovoltaics suffer from low efficiencies because of poor exciton or electron-hole transfer. Inorganic/organic hybrid solar cell, although still in its infancy, has attracted great interest thus far. One of the promising ways to enhance exciton dissociation or electron-hole transport is the doping of lanthanide phosphate ions. However, the underlying photophysical mechanism remains poorly understood. Herein, by applying femtosecond transient absorption spectroscopy, we successfully distinguished hot electron, less energetic electron, hole transport from electron-hole recombination. Concrete evidence has been provided that lanthanide phosphate doping improves the efficiency of both hot electron and "less energetic" electron transfers from donor to acceptor, but the hole transport almost remains unchanged. In particular, the hot electron transfer lifetime was shortened from 30.2 to 12.7 ps, that is, more than 60% faster than pure TiO2 acceptor. Such improvement was ascribed to the facts that the conduction band (CB) edge energy level of TiO2 has been elevated by 0.2 eV, while the valence band level almost remains unchanged, thus not only narrowing the energy offset between CB levels of TiO2 and P3HT, but also meanwhile enlarging the band gap of TiO2 itself that permits one to inhibit electron-hole recombination within TiO2. Consequently, lanthanide phosphate doped TiO2/P3HT bulk-heterojunction solar cell has been demonstrated to be a promising hybrid solar cell, and a notable power conversion efficiency of 2.91% is therefore attained. This work indicates that lanthanide compound ions can efficiently facilitate exciton generation, dissociation, and charge transport, thus enhancing photovoltaic performance.

Plasmonic "pump-probe" method to study semi-transparent nanofluids.

Nanofluids have been increasingly used in a wide range of thermal applications. Although these applications can benefit greatly from investigating the behavior of nanoparticles under different heating scenarios, there is a lack of experiments that can achieve this. To overcome this challenge, an optical "pump-probe"-type experiment is suggested in this paper. In experiments of this type, a set of "pumping" nanoparticles are specifically selected to absorb laser radiation. These particles represent a flexible tool for volumetric heating. A second set of "probing" nanoparticles can be tailored to scatter a separate optical probing signal. This work presents a selection procedure for nanoparticles of both types. The selection procedure is then demonstrated for a specific example where the pump and probe wavelengths are of 980 and 532 nm, respectively. Gold nanorods with diameters of 10 and a length of 58 nm are selected as the "most suitable" absorbing particles, while silver nanospheres with a diameter of 110 nm are selected as the "most suitable" scattering particles. These particles are synthesized and shown to experimentally match the desired optical properties. Overall, this paper proposes and demonstrates an approach by which it is possible to design and fabricate particles for a wide range of optical studies in semi-transparent nanofluids.

A Two-Step Hydrothermal Synthesis Approach to Monodispersed Colloidal Carbon Spheres.

This work reports a newly developed two-step hydrothermal method for the synthesis of monodispersed colloidal carbon spheres (CCS) under mild conditions. Using this approach, monodispersed CCS with diameters ranging from 160 to 400 nm were synthesized with a standard deviation around 8%. The monomer concentration ranging from 0.1 to 0.4 M is in favor of generation of narrower size distribution of CCS. The particle characteristics (e.g., shape, size, and distribution) and chemical stability were then characterized by using various techniques, including scanning electron microscopy (SEM), FT-IR spectrum analysis, and thermalgravity analysis (TGA). The possible nucleation and growth mechanism of colloidal carbon spheres were also discussed. The findings would be useful for the synthesis of more monodispersed nanoparticles and for the functional assembly.